GetDefault Returns the default settings for the manual gain for the Log mode. Parameter mode Defines which fields of view are used for auto gain control: BlackLevelMode mode Description Returns the current mode of black level correction. Additionally it is ORed if offset is supported. Set int redOffset, int blueOffset Description Sets the offset values for the red and blue channels. Parameter Window handle 3. Some methods are overloaded, so they can be called with different parameters.
| Uploader: | Bazil |
| Date Added: | 19 April 2009 |
| File Size: | 9.9 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 4470 |
| Price: | Free* [*Free Regsitration Required] |
Parameter Returns the current ID. Hardware conversion using vkewer standard filter mask, but conversion is done on the graphic board uc Large multi-camera systems Connecting a large number of cameras to a single PC may require a large working memory RAM. The maximum gain factor settings also vary from sensor to sensor. GetDefault out int speed Description Returns the default value for auto speed.
Download uc Viewer by OEMINC
Set uint speed Description Sets the speed value for the auto function. Note To use maximum bandwidth, we recommend connecting the cameras directly to the USB ports on the vewer. EnableImageScaling Enables real-time scaling of the image to the size of the display window. ResetCaptureStatus Description Resets the capture status infomation.
The following addresses for nDeviceAddr are assigned to the uc and must not be used: GetAutoFreerunDefault Returns the default auto flash setting in freerun mode. Set Sets the offset for black level correction. DisableScaling Description Disables real-time scaling. SetRed int s32Factor Description Sets the red channel gain factor Green int s32Green, out int s32Factor Description Converts the index value for the green gain factor. Depending on the PC hardware used you might not be able to reach the camera's maximum frame rate.
Driver for Thorlabs DCx cameras.
GetSupported out bool supported Description Returns is the setting of the default photometry mode for auto exposure shutter is supported. Parameter range Returns the minimum number of frames to be skipped. The driver transfers the images to an allocated image memory or, if Direct3D is used, to the graphics card.
Select a Web Site
When saving an image Freeze should not uc It may take a few images until the flash timing is adjusted. NET library Description Returns the default offset value. Freeze int wait uc Typically the dtype will be uint8uc40 sometimes uint16 in the case of bit monochromatic cameras.
Allocate defines in its parameters the color depth and display type. Set Sets the speed for auto white balance.
Uc480 Cmos Driver Download
Returns the default mode see SetPhotom. GetDefaultMaster Returns the default master channel gain factor.
Kamal Patel view profile. Hot pixel correction is possible via the user-defined hot pixel list.
uc Viewer Download -
This will automatically build the bindings to the DLL. Flash Gpio Led Pwm 3. SetMaster Sets the master channel gain factor Note on default settings for RGB gains The default setting values for the red, green and blue channel gain factors depend on the color correction matrix that has been set.
Type type Description Returns the current set type of the auto white balance control. Returns the current mode see Set.
No comments:
Post a Comment